Cut Resistant
GRANBERG 547
Cut-Resistant Gloves
Typhoon® liner, sandy-nitrile palm coating.
- High protection against cuts — EN 388:2016 level D.
- Excellent abrasion resistance and tear resistance far exceeding the requirements for the highest EN 388:2016 level.
- Knit 15-gauge Typhoon® HPPE and steel fibre blend shell, comfortable and flexible — has good cut resistance, providing the gloves with 360° cut protection.
- Very good dexterity, touch sensitivity, and overall glove comfort.
- Excellent grip in dry, wet, and oily conditions – thanks to the sandy nitrile palm coating (also known as micropore nitrile), which displaces liquids on surfaces and creates a “suction effect”.
- Elasticated cuff provides a comfortable and secure fit around the wrist.
- Reinforced thumb crotch provides extended use life.
- OEKO-TEX® 100 approved.
Suitable for:
Assembly work with extremely high requirements to abrasion resistance and where there is risk of cut injuries.
Article number
116.547
Colour
Black, Blue
Glove Fit
Tight fit
Grip
Dry, Wet, Oil
Grip design
Sandy
Length
22,5-28,5 cm
Sizes
6 | 7 | 8 | 9 | 10 | 11 | 12
Coating material
Nitrile
Coating type
Palm coated
Liner material
Typhoon®
ANSI/ISEA 105-2016
CE
EN 388:2016+A1:2018
4X43D
EN 407:2020
X1XXXX
EN ISO 21420:2020
Oekotex Standard 100
21.HNO.59941Hohenstein HTTI
EN 374
CHEMICAL
CAS
CLASS
PERMEATION
Packaging Unit
Pair
Sales Units Per Bundle
12
Sales Units Per Outer Case
144